Enterprise Configuration Configuring P2000 Central Server
24-10515-21 Rev. – 2-21
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
6. Verify that the site is listed in the right window pane. Keep the System
Configuration window open.
POPULATING THE ENTERPRISE SETTINGS
Before any subscriptions can be created, the initial site tables must be populated. This is
done on the Central Site in the Enterprise Site Edit screen of P2000.
T
o add regional sites:
Add the sites that have already been established. More sites can be added at a later
ti
me.
1. In the System Configuration window, under E
nterprise Parameters
right-click the Enterprise Sites icon and select Add.
2. The Enterprise Site Edit window opens
where you can add a new site. Each
site added so far is listed.
To Next Page
Loading...
