Configuring P2000 Central Server Enterprise Configuration
2-22 24-10515-21 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
3. Specify the name and database server of the regional site.
For S
ubscription Sites select the sites for which you want the data to be
available on this regional server. Selecting All sites will subscribe this server
to data from the entire Enterprise system. Click OK.
4. Repeat steps 1 and 2 for each regional site.
5. Verify that the added site(s) appear in th
e System Configuration window.
Close this window.
SETTING UP P2000 PUBLICATIONS
!
CAUTION
Before proceeding, stop all P2000 Services on the central site and quit
their monitoring.
To stop all P2000 Services:
1. From the P2000 main menu, select System>Se
rvice Control.
2. If prompted, enter password (mas
ter is the factory default setting).
To Next Page
Loading...
