Johnson Controls P2000 - Page 47

Enterprise Configuration Merging Data Between Sites
24-10515-21 Rev. – 3-5
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
3. Backup the Pegasys and BadgeImages databases on the regional server using
P2000 backup utility:
 From the P2000 Main menu, select System>Database Maintenance.
Enter password when prompted and click OK. The Database
Maintenance window appears.
 Depending on your current setup, select Backup Data Append or
Backup Data Overwrite to backup the Pegasys database; click
Perform.
NOTE
Backup device needs to be configured prior to performing backup. Refer to
the P2000 Software User Manual for details.
 Click Ye s to confirm that you want to backup the data (this action cannot
be undone). The P2000 backup utility will begin the backup and will exit
when the procedure is completed.
 Depending on your current setup, select Backup Images Append or
Backup Images Overwrite. Click Perform to backup the P2000
BadgeImages database; click Perform.
 Click Ye s to confirm that you want to backup the data (this action cannot
be undone). The P2000 backup utility will begin the backup and will exit
when the procedure is completed.
 Click Exit to close the Database Maintenance window.
4. Back up the Badge Layouts and application files.
It is recommended that you back up the entire N:\Bmaster and C:\Program
Files\Johnson Con
trols\CARDKEY P2000\Badgemaster directory, including
all subdirectories.