Enterprise Configuration Configuring P2000 Regional Server
24-10515-21 Rev. – 4-3
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
To modify SQL Server Agent (MSSQLSERVER) account:
This procedure is very similar to the one performed for the psqlserver account.
1. In the Services window, right-click the SQ
L Server Agent
(MSSQLSERVER) icon and select Properties.
2. Under the Log On tab, select the This Account radio button. Browse for
psqlserver or type .\psqlserver. Specify and
confirm password
(Master1 is the factory setting).
3. Click on the General tab and from the Startup type drop-down list select
Automatic. Click OK.
4. In the Services window right-click the SQL Ser
ver Agent
(MSSQLSERVER) icon and select Start.
5. Close the Services window.
6. Reboot the P2000 regional server.
To Next Page
Loading...
