Enterprise Configuration Configuring P2000 Regional Server
24-10515-21 Rev. – 4-19
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
7. Type in the following command:
exec dbo.spP2000ReplicationSetAllTablesIDRange XX, YY
Where XX is the beginning of the ID range, and YY is the end of the ID range.
See Table 2-2 reference.
8. Click the “Parse Query” button to check integrity of the script.
9. As in step 4, verify that Pegasys is selected
from the drop down list and click
the ! Execute button.
10. Close the Microsoft SQL Server Managemen
t Studio window.
T
o complete the configuration:
1. Reboot P2000 regional server.
2. Launch P2000 on P2000 regional server.
3. Back up the P2000 regional server database (o
verwrite the initial backup).
4. Verify data on the P2000 regional server.
5. In System Configuration, define the P20
00 regional site as an Enterprise Site
(refer to the P2000 Software User Manual for details.).
6. Perform a download to all panels.
To Next Page
Loading...
