Johnson Controls P2000 - P2000 Server to Back End Router Connection

Figure 2-3: P2000 Server to Linksys BEFVP41 Router Connection
Figure 2-2: P2000 Server to NetScreen-5XT Router Connection
P2000 Server
(Rear View)
Ethernet
WAN
Linksys BEFVP41 Router
1234
POWER
Reset
II X
WAN
Configuration VPN/DSL Security Option
2-4 24-10618-155 Rev. A
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
P2000 Server to Back End Router Connection
To connect the P2000 Server to the back end router, connect a network cable from
one of the Router’s Trusted (or available LAN) ports to the P2000 Server.
P2000 Server
(Rear View)
Ethernet
UNTRUSTED
NetScreen-5XT Router
TRUSTED
43 2 1
DC POWER
CONSOLE MODEM
WAN