Johnson Controls P2000 - Linksys BEFVP41 Configuration

Configuration VPN/DSL Security Option
2-14 24-10618-155 Rev. A
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Linksys BEFVP41 Configuration
This section describes how to configure the Linksys BEFVP41 router.
 T
o access the Linksys device:
1. Change the IP address of your PC or laptop to 192.
168.1.xxx (where xxx
can be between 2 and 254) and the subnet mask to 255.255.255.0.
2. Open your web browser and enter 192
.168.1.1 in the Address bar; press
<Enter>.
Example: htt
p://192.168.1.1
The Enter Network Password dialog box appears.
3. Enter admin in the Password field and leave the User Name field blank.
Click OK.
4. On the Linksys Setup window, click the VP
N tab.