Figure 2-7: Linksys BEFSX41 Front End Router Installation
Configuration VPN/DSL Security Option
2-16 24-10618-155 Rev. A
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
4. Connect a network cable from the Linksys BEFSX41’s WA N port to the
WAN. See Figure 2-7.
Laptop or PC
Ethernet
Used for Configuration
Purposes Only
Controller or
Workstation
WAN
Linksys BEFSX41 Router
1234
POWER
Reset
WAN
Linksys BEFSX41 Configuration
This section describes how to configure the Linksys BEFSX41 router.
T
o access the Linksys device:
1. Change the IP address of your PC or laptop to 192.
168.1.xxx (where xxx
can be between 2 and 254) and the subnet mask to 255.255.255.0.
2. Open your web browser and enter 192
.168.1.1 in the Address bar; press
<Enter>.
Example: htt
p://192.168.1.1
The Enter Network Password dialog box appears.
To Next Page
Loading...
