EasyManua.ls Logo

Johnson Controls P2000 - Netscreen-5 XT Configuration

Johnson Controls P2000
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 2-5: NetScreen-5XT Front End Installation
Configuration VPN/DSL Security Option
2-6 24-10618-155 Rev. A
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
4. Front End Installation: Connect a network cable from the NetScreen-5XT’s
Untrusted port to the WAN. See Figure 2-5.
Connect a network cable from an available Tr
usted port on the
NetScreen-5XT to the Controller or Workstation.
Laptop or PC
UNTRUSTED
NetScreen-5XT Front End Router
Ethernet
TRUSTED
4321
DC POWER
CONSOLE MODEM
Used for Configuration
Purposes Only
Controller or
Workstation
WAN
NetScreen-5XT Configuration
This section provides instructions for configuring the NetScreen-5XT’s parameters
using the WebUI.
T
o access the NetScreen using the WebUI:
Follow these steps to access the NetScreen-5XT device with the WebUI
manag
ement application.
1. Connect a local PC or laptop to one of the Tr
usted interfaces on the router.

Other manuals for Johnson Controls P2000

Related product manuals