VPN/DSL Security Option Configuration
24-10618-155 Rev. A 2-7
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
2. Change the IP address of the PC to 192.168.1.xxx (where xxx can be
between 2 and 254) and change the subnet mask to 255.255.255.0.
3. Open your browser and enter the NetScreen’s default LAN IP address of
192.168.1.1 in the Address bar.
Example: htt
p://192.168.1.1
The Enter Network Password dialog box appears.
4. Enter n
etscreen in the User Name and Password fields. Use lowercase
letters only. The User Name and Password fields are both case sensitive.
5. Click OK.
The Initial Configuration Wizard appears.
To Next Page
Loading...
