Configuration VPN/DSL Security Option
2-8 24-10618-155 Rev. A
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
To configure the NetScreen with the Initial Configuration Wizard:
1. Select NA
T Mode and click Next.
2. Enter master into the Password and Confirm Password fields; click Next.
3. Select Static IP, enter the following, and click Next:
Untrusted Zone Interface IP: 2
00.0.0.2
Netmask: 2
55.255.255.0
Gateway: 2
00.0.0.1
4. Enter the following and click Next.
Front End Router:
Trust Zone Interface IP: 1
92.168.1.1
Netmask: 2
55.255.255.0
To Next Page
Loading...
