Johnson Controls T500HCP-1 User Manual

16
T500 Series Programmable Thermostats Product/Technical Bulletin
P
rogramming Overview
Thermostat programming is a 3-part process: setting
current time, choosing event setpoints, and setting
event times. Throughout the programming procedure,
the following terms will be used:
Event
= morning, day, evening, night
Event time
= the time the event starts
Event setpoint
= the temperature setpoint of the
event; each event can have only one setpoint for
heating or cooling.
Program flexibility is achieved by varying the program
start times. When consecutive events are programmed
with the same event time, the thermostat will control
the temperature according to the setpoint of the latest
event.
Table 7 is an example of event times and setpoints for
a given week using a 4-event program. See the
owner’s manual for a blank table.
Note: A 2-event program will only include day
and night events.
Table 7: Sample 4-Event Program Settings
Event Morning Day Evening Night
Event
Setpoint
Heat
68
°
F
Cool
80
°
F
Heat
72
°
F
Cool
76
°
F
Heat
66
°
F
Cool
78
°
F
Heat
60
°
F
Cool
85
°
F
(Time) (Time) (Time) (Time)
Monday
6 a.m. 8 a.m. 5 p.m. 11 p.m.
Tuesday
6 a.m. 8 a.m. 5 p.m. 11 p.m.
Wednesday
6 a.m. 8 a.m. 5 p.m. 11 p.m.
Thursday
6 a.m. 8 a.m. 5 p.m. 11 p.m.
Friday
6 a.m. 8 a.m. 5 p.m. 11 p.m.
Saturday
6 a.m.* 6 a.m. 12 p.m. 12 p.m.
Sunday
12 p.m. 12 p.m. 12 p.m. 12 p.m.**
* Thermostat controls to the day setpoint until noon.
** Thermostat controls to the night setpoint until 6 a.m. Monday morning.

Johnson Controls T500HCP-1 Specifications

General

Brand	Johnson Controls
Model	T500HCP-1
Category	Thermostat
Language	English