Johnson Controls T701DFN-1 - Deadband Operation

About Advanced Features & Operation
Page 16
CALIBRATION - Under normal circumstances it will not
be necessary to adjust the calibration of the temperature
sensor. If calibration is required, please contact a trained
HVAC technician to correctly perform the following
procedure.
Place the thermostat in the OFF
mode.
Press the MODE button once. The
thermostat temperature will be
displayed and may be calibrated
using the UP or DOWN button.
After calibration is complete, press
the MODE button once to save
your changes and return to normal
operation.
Press button.
While holding the MODE button,
press and hold the DOWN button
for 5 seconds. All icons will
appear on the display.
and hold the MODE
MODE
1
2
MODE
3
4
MODE
OFF
72
72
OFF
72
60
HEAT
i 07
88
unoccupied
Setup
88
88
COOL
HEAT
Override
Locked
AUTO
OUTSIDE