Johnson Controls Unisab III User Manual

Switch between the password levels with the and keys. When you have selected the ap-
propriate
level with the
key, you must enter in this case the four digit Superuser password
using the arrow keys.
When you have entered the four digits, press and
F3
/OK.
If the password is accepted, you are now back in the Suction pressure limits picture and may
change the Low shutdown limit with the
and keys.
When you have set the limit value, press to store the value in the memory. Before press-
ing you
have the possibility to undo the parameter change by pressing
instead of . By
doing so, the changes you have just made will not be stored in the memory.
Operating Unisab III control
Operating manual - Unisab III
005650-en 2013.10
21/48

Johnson Controls Unisab III Specifications

General

Brand	Johnson Controls
Model	Unisab III
Category	Control Systems
Language	English