FORM 160.72-O1 (810)
JOHNSON CONTROLS
58
TIME SETPOINTS SCREEN
Oil Heater Shutdown Delay
Displays the amount of time the oil separator heater
will be enabled after shutdown is complete.
Oil Separator Heater Startup Delay
The time required during the startup sequence during
which the compressor and gear auxiliary lubrication
pumps will run before starting the motor.
Prelube Time
The time the auxiliary oil pump of the compressor and
if present the gear box will run to establish proper oil
pressure before the compressor motor starter will be
energized.
PROGRAMMABLE
Requires access level of SERVICE,
Service Technicians refer to Service In-
structions (Form 160.72-M1) for opera-
tion instructions and explanation of all
programmable setpoints and displayed
values.
Change Setpoints
Allows a qualified Service Technician to change any
of the setpoints shown above. Refer to the Service In-
structions (Form 160.72-M1).
NAVIGATION
Home
Access Level Required: VIEW
Returns user to Home Screen.
Setup
Access Level Required: VIEW
Returns to the Setup Screen.
Temperature Setpoints
Access Level Required: VIEW
Moves directly to the Temperature Setpoints Screen.
Pressure Setpoints
Access Level Required: VIEW
Moves directly to the Pressure Setpoints Screen.
Misc Setpoints
Access Level Required: VIEW
Moves directly to the Miscellaneous Setpoints Screen.
To Next Page
Loading...
