Johnson Controls York Smart Equipment SC-EQ - TABLE 8 - Technical Specifications; Section 5 - Technical Specifications

JOHNSON CONTROLS
43
FORM 450.50-N1
ISSUE DATE: 08/19/2019
5
TABLE 8 - TECHNICAL SPECIFICATIONS
Power Requirements
External to Equipment (Inside Enclosure): 120/240 VAC Primary 50/60 Hz, 24
VAC Secondary Transformer (+10%/-15%), 400 mA, Nominal 12 VA
Internal to Equipment SC-EQ Comm Card Assembly: 24 VAC (±15%), 50/60
Hz, 400 mA, Nominal 12 VA, 12 VDC (+50%/-2%), 400 mA, Nominal 12 VA
Addressing
Addressing is selectable by the MAC Address Switch – 8 Position DIP Switch
using Switches 1 through 7.
• BACnet MS/TP Addressing Range 1 to 127
• Modbus RTU Addressing Range 1 to 127
• N2 Addressing Range1 to 127
Installation Environment Protected, Dry
Ambient Operating Conditions Temperature: -40 to 65°C; (-40 to 149°F) Humidity: 0% to 95% Noncondensing
Ambient Storage Conditions Temperature: -40 to 85°C (-40 to 185°F) Humidity: 0 to 95% RH, Noncondensing
Power
External to Equipment (Inside Enclosure): One 3-Position Terminal Block for
120/240 VAC Supply Power
Internal to Equipment SC-EQ Comm Card Assembly: Removable Terminal
Plug for 24 VAC Supply Power and Removable Terminal Plug for 12 VDC Supply
Power
Communication Wiring Terminations
BAS Protocol is automatically detected
BAS Port J12: RS-485 BAS Port Supporting BACnet MS/TP, Modbus RTU and
N2 Protocols With Available EOL Termination Switch
Equipment Protocol and Model are automatically detected
EQ 485 Port J8: RS-485 Equipment Port Supporting BACnet MS/TP and YORK
Talk II Protocols with Available EOL Termination Switch EQ 232 Port J7: RS-232
Equipment Port Supporting YORK Talk 3 Protocol
Connected Services
CS Port J11: RS-485 BAS Port Supporting BACnet MS/TP Protocol With
Available EOL Termination Switch
Wiring
Network Cable: 0.51 mm (24 AWG) (3 Cores Plus Shield)
Power Cable: 1.02 mm (18 AWG) Copper Wire Rated for 10 Amperes Per Core at
250 VAC
Materials
External to Equipment:
Metal Enclosure with Removable Lid, SC-EQ Comm Card Assembly, Power
Transformer
Internal to Equipment E-Link Board Assembly: SC-EQ Comm Card Assembly
Mounting
External to Equipment: Screw Mount Enclosure
Internal to Equipment: SC-EQ OptiView/Latitude and IPU-II installation kit
Dimensions
External to Equipment: 241.3 x 136.5 x 63 mm (9 1/2 x 5 3/8 x 2 1/2 in.)
Internal to Equipment: 102 x 152 x 25.4 mm (4 x 6 x 1 in.)
Shipping Weight
External to Equipment: 2 kg (4.5 lb)
Internal to Equipment: 227 g (8 oz)
Compliance United States UL Listed 916/FCC Part 15 Conducted and Radiated
Europe
CE Mark - Johnson Controls, Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of the EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
BTL B-ASC (BTL-24317)
NOTE: The performance specications are nominal and conform to acceptable industry standards. for application of conditions beyond these
specications, consult the local Johnson Controls ofce. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
SECTION 5 - TECHNICAL SPECIFICATIONS