CRANK REPLACEMENT PROCEDURE
Tools required:
Puller
5-6
Wooden
hammer
Hexagonal
socket wrench
(19&13mm)
Philips
screwdriver
Hex key (6mm)
C-clip pliers
Adjustable
wrench
Procedure:
1 Remove the joint screw between
handlebar and handrail links.
2 Remove all of the covers.
3 Remove the nut(A) then pull the
crank and pedal set out
4 Remove the c-clip (B) then with
wooden hammer tap the crank
out.
5 Replace the crank with a new one
Reverse step 1-4 to install the
6
parts
A
Tap here
B
To Next Page
Loading...
Need help?
General
