542933-UIM-C-0112
24 Johnson Controls Unitary Products
If the “Homeowner Configuration” is selected, the control will import/export the sound, display,
schedule, security, View/Mode, etc. In short, it will be all homeowner settings including the personal-
ized schedules.
• Installer configuration file
If the “Installer Configuration” is selected, the control will import/export every file available on the
Touch Screen Communicating Control. Including the Homeowner settings, programmed schedules,
dealer information, etc.
Auto Setup
Auto setup is used to view the installer system configuration screens that the installer was originally
directed through. These screens will vary depending on the installed components.
Edit/Add Devices
Edit/Add devices screen is used to add accessories/upgrades to the communicating system. These
accessories/upgrades may include: heat pump, air conditioner, filters, humidifiers, UV lights, etc.
Adding equipment through this screen will allow the control to provide maintenance updates and
track any changes to the system. It will also ensure proper system functionality. Accessories must
be added using this screen to enable the functionality of the Touch Screen Communicating Control
for each accessory.
To add a device:
Auto setup screens are described in more detail in other sections of this document.
Follow the installation instructions provided with the equipment being installed. For wiring instruc-
tions of Humidifier, see the wiring section of this document.
1. Select from one of the options on the main,
edit/add devices screen (see picture).
To Next Page
Loading...
Need help?
General