1110
INSTALLATION
INSTALLATION
3. Buckle the vehicle belt.
1. Open the belt lockoff.
4. Push the base into the
vehicle seat rmly A and
pull the vehicle belts
tight B.
5. Hold vehicle belts tight
and engage the belt
lockoff.
3
4
1
3. Vehicle belt is not
twisted.
4. Level indicator
bubble is fully in the
clear area.
2. Vehicle belt is tight.
2
Checklist — Vehicle Belt Installation
1. Vehicle Buckle
engaged.
1
5
4
3
BELTS MUST BE
TIGHT.
LOOSE BELTS ARE
DANGEROUS.
2. Pass the vehicle belt
through the openings in
the base labeled ‘BELT
PATH’
2
Installation — Vehicle Belts
A
B
IMPORTANT
Belts must not be
twisted.
Place the base on the
vehicle seat in line with a
top tether anchorage point.
CLICK
To Next Page
Loading...
