1514
INSTALLATION
INSTALLATION
How to use the Tether Strap
Always use the tether strap.
Connect the tether strap to the built-in anchorage tting
in the vehicle, or if there is not one available, install the
anchor tting supplied with this restraint.
Store the extra webbing in the bag attached to the end of
the tether.
Snap Hook
Tether
Anchorage
Tether Adjustor
Tether End
Storage Bag
NOTE: the tether strap wraps around the sides of
the restraint, not over the top.
If the canopy is fitted the tether passes outside it.
2. To increase webbing
tension pull upper strap
through adjustor.
How to use the Tether Strap
PULL
3. To release webbing
tension press adjustor
button and pull lower
strap.
PULL
PRESS
DO NOT attach the
hook to a parcel tie
down point.
1. Connect the snap hook
securely to the anchorage
tting.
Note: there are several
different looking types of
anchorage, yours may not
look like this.
Check the vehicle owners
manual.
2
3
1
When the
restraint is in a
vehicle always
fit the tether
into the guide
at the back.
To Next Page
Loading...
