TP820 User’s Manual
- 23 -
Note: Paper head should be pulled out by the direction of paper-input slot, but not the
opposite.
3. Pull out a small amount of paper as shown in Fig 4-3.
4. Put the paper as shown below, and then close the cover.
5. If you have connected the cable, turn on the power and then the printer is ready.
NOTE: After finishing installing the paper, if PAPER OUT indicator and ERROR indicator are
still on, or the printer rattle when feeding the paper, please open the cover and
re-close it tightly.
Fig 4-4 Close the cover
Fig 4-3 Pull out the paper
To Next Page
Loading...
