Jolimark TP820 - Appendix Commands List

TP820 User’s Manual
- 44 -
Appendix Commands List
Here list the commands supported in the printer in alphabetical order.
Control commands Functions
BEL
Beeper
HT
Horizontal tab
LF
Print and line feed
FF
Print and Feed paper to next black mark position
DLE EOT Real-time status transmission
ESC BEL Beep for appointment
ESC SP
Set right-side character spacing
ESC !
Set print mode
ESC $ Set absolute print position
ESC % Select/cancel user-defined character set
ESC &
Define user-define characters
ESC *
Select bit-image mode
ESC –
Turn underline mode on/off
ESC 2
Select default line spacing
ESC 3
Set line spacing
ESC =
Select peripheral device
ESC ?
Cancel user-define character
ESC @
Initialize printer
ESC D
Set horizontal tab position
ESC E
Turn emphasized mode on/off
ESC J
Print and feed paper
ESC M
Select character font
ESC R
Select the international character set
ESC V
Turn 90°clockwise rotation mode on/off
ESC \
Set relative print position
ESC a
Select justification
ESC c 3
Select paper end sensor
ESC c 4
Select paper sensor to stop printing
ESC c 5
Enable/disable panel button
ESC d
Print and feed n lines
ESC j
Print and feed paper conversely
ESC p
Generate pulse
ESC t
Select code page
ESC {
Turn on/off upside-down printing mode
FS !
Select Chinese character mode
FS &
Set Chinese language mode
FS -
Turn Chinese character underline on /off
FS .
Cancel Chinese language mode
FS 2
Define user-define Chinese characters
FS S
Set Chinese character spacing