Need help?Do you have a question about the Jolimark DP350 and is the answer not in the manual?
Overview of key functionalities and features of the printer.
Verifying contents of the packing box for completeness.
Instructions for safely removing protective elements from the printer.
Identification of the primary physical components of the printer.
Guidance on selecting an optimal and safe location for printer setup.
Step-by-step process for installing the ribbon cartridge.
Instructions for properly connecting the printer to a power source.
How to perform a built-in self-test to verify printer functionality.
Details on connecting the printer to a computer via various interfaces.
Guide for establishing a connection using a parallel cable.
Guide for establishing a connection using a USB cable.
Guide for establishing a connection using a serial cable.
Guide for establishing a connection using an Ethernet cable.
Procedures for installing the necessary printer driver software.
Configuration steps for network connectivity and settings.
Initial steps for establishing a network connection for the printer.
Guide to configuring the printer's IP address for network use.
Steps to install the printer driver for network printing.
Introduction to the printer's control panel layout and keys.
Explanation of the meaning and status of each LED indicator.
Detailed description of the primary functions of control panel buttons.
Advanced functions and operations controlled via the panel.
Specific control panel functions when using tractor paper.
Specific control panel functions when using cut sheet paper.
How to adjust and control the printer's print speed settings.
Configuration options for copy mode and definition.
Fine-tuning printing home and tear positions for accuracy.
How to feed paper to the designated tear-off position.
Details on additional key combinations for special functions.
Functionality of the lever for selecting paper type.
Description of the manual paper feed knob.
Adjusting the lever for optimal printing on different paper thicknesses.
Instructions for loading various types of paper into the printer.
Step-by-step guide for loading individual cut sheets of paper.
Instructions for loading continuous tractor feed paper.
Guidance for loading multi-part carbonless forms.
Process for loading label sheets into the printer.
Method for inserting and printing on envelopes.
How to modify printer parameters via control panel or software.
Adjusting printer settings directly using the control panel.
Configuring printer parameters using PC software.
Detailed explanations of various printer setting options.
Procedure to reset printer settings to factory defaults.
Solutions for problems related to the printer not receiving power.
Diagnosing and resolving common issues preventing printing.
Solutions for problems with paper feeding, jamming, or ejection.
Adjusting print alignment for improved quality and accuracy.
Instructions for routine cleaning of the printer components.
Information on when and how to contact support for unresolved issues.
Overview of the printer's general technical specifications.
Technical details of the printer's various interface connections.
Technical characteristics of the parallel port connection.
Technical characteristics of the USB port connections.
Technical characteristics of the serial port connection.
Technical characteristics of the Ethernet port connection.
Defines the printable margins and width for different paper types.
To Next Page
General
