Jolimark DP350 - The Guide; Printer Features

DP350 User's Manual
- iii -
Warnings, Cautions, and Notes
Pay attention to the following promises when using this manual:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information and useful tips on the operation of your printer.
The Guide
First thanks for purchasing this Jolimark printer. Your printer is a 24-pin 80-column dot matrix printer,
offering a wide range of features and multiple functions. It can be widely used in tax, mail, telecom,
police, hospital, insurance, finance, stock, customhouse, cabaret, aviation and transport etc.
Printer Features:
z Install print paper easily
The installation design makes you operate easily, install paper rapidly and save your time.
z
Tear off function
This causes tractor paper to be automatically fed to the tear-off position at the edge of the window
cover, for easy tear-off at the perforations after printing. This zero tear-off capability helps eliminate
paper wastage.
z Facility switch between cut-sheet and tractor paper
Feed the tractor paper back to the installing position through LOAD/EJECT key on the control panel,
pull the paper select lever to the cut-sheet position. Insert the cut-sheet from front to print. If you want
to use tractor paper again, pull the paper select lever back to the tractor paper position after cut-sheet
printing. Then press LOAD/EJECT key, tractor paper may be fed to the printer again.
z
Eject function
The function allows the user eject the tractor paper through the facility key on the control panel.
z
Select the data transfer interface function automatically
The printer configures with a parallel interface, two USB interfaces, a serial interface or an Ethernet
interface (according to the specific interface standards). Connect the printer to the computer with the
correct cables. The printer would switch the correct interface according to the type of data
automatically.
z
Emulation
The printer supports the Epson ESC/PK2 and IBM 2391 emulations as standard.
z
Break pin compensation function
User can set the printer to print using the pin which is in good condition to compensate the break pin.
z
Pin switch rotation function
User can set pins to switch while printing form transverse line in order to improve print head life.