DP350 User's Manual
- 35 -
3.3 Printer Setting Descriptions
Options Description
FONT
Specify a kind of ASCII fonts to print when printer receives character printing
task. If the print data with font instruction, printer gives priority to print data
instruction. (Only valid when CHARACTER MODE is choosing ASCII)
ENG PITCH Specify the ASCII character spacing in characters per inch (cpi).
CHI PITCH Specify the Chinese character spacing in characters per inch (cpi).
LINE SPACING
Specify the line spacing in lines per inch (lpi).If the print data with vertical pitch
instruction, printer would give priority to print data instruction.
FORM LENGTH
Specify the page length of the form to be used, for both cut sheet and
continuous paper. Printer feeds to next page according to the specified page
length. If the print data with page length instruction, printer would give priority to
print data instruction.
FORM LOCK
After selecting this function on, the page length setting would be locked. Printer
feeds to next page according to the current setting value and would not be
affected by the page length instruction of the print data.
L_SPACING LOCK
After selecting this function on, line spacing setting would be locked. Printer
feeds the paper according to the current setting parameter and do not affected
by the line spacing instruction of the print data.
PAGE SKIP
After select this function on, printer would leave one inch (25.4mm) margin at
the perforation of the tractor paper automatically. If the print data with page
margin instruction, printer would give priority to print data instruction.
COMPRESS PRINT
After selecting this function on, printer would print out transverse compressed
content according to the specified percentage in normal speed. When
auto-compress mode is selected, printer would detect paper width automatically
and choose the proper percentage to print.
LANGUAGE Specify the printer menu language as English or Chinese.
EMULATION Specify printer's control commands.
PRT-QUALITY
Choose the printing quality to normal or LQ, when setting to LQ, printer will print
in the highest printing quality.
Note: Letter Quality is only valid when the printing speed is normal.
PRINT DIR
Select the printing direction of the print head: unidirectional, bidirectional or
selected via software.
CHAR. MODE
Select ASCII or Chinese character mode to print when printer receives character
printing task.
INTL CHAR SET
Specify the printer internal character set according to different using
circumstances of international characters.
CHARACTER SET Specify character set as Italic Character or Graphic Character.
CODE PAGE
Select the code page according to different national characters use
circumstances.
COPY MODE According to customer's printing requirement, select the printing capability.
AUTO LF
If this function is on, printer would advance the paper one line automatically after
receiving every carriage return instruction.
TEAR OFF
After select this function on, when the printer has finished printing, paper would
be fed to the set tear off position automatically, and you should tear off the paper
manually.
TEAR POS
Specify the compensated value to aim the continuous paper gap at the tear off
bar of printer.
COVER OPEN
After select this function on, if the window is open, printer would stop printing
To Next Page
Loading...
