Need help?Do you have a question about the Jolimark DP321 and is the answer not in the manual?
Easy installation of print paper for quick operation.
Automatically feeds paper to tear-off position for easy tearing.
Allows switching between cut-sheet and tractor paper feeding.
Automatically switches between parallel, USB, or serial interfaces.
Check all items in the package against the packing list.
Steps to remove protective materials from the printer.
Step-by-step guide to install the paper feed knob.
Procedure for installing the ribbon cartridge correctly.
Steps to install the push tractor at the back of the printer.
Guide for connecting the printer via parallel interface.
Guide for connecting the printer via USB interface.
Guide for connecting the printer via serial interface.
Automatic installation via setup.exe on the driver disc.
Manual installation process for serial and parallel interfaces.
Guide for installing USB drivers on various Windows versions.
Installing USB drivers on Windows 98/ME.
Explains the meaning of each LED indicator on the control panel.
Details how to operate the printer using control panel buttons.
Loading various types of paper into the printer.
Printing the current configuration report.
Accessing and navigating the printer's setup menu.
Selects printer emulation mode (EPSON or IBM).
Sets the language for menu content and printing.
Selects between ASCII or Chinese character modes.
Sets the font for printing in absence of software control.
Enables tearing off paper at the tear position.
Selects pin switch mode for printing table lines.
Settings for serial interface: Baud rate, parity, etc.
Troubleshooting common printer issues.
Diagnosing and fixing faint or uneven print quality.
Troubleshooting missing dots in characters or graphics.
Adjusting print position when it's not as expected.
Troubleshooting cut-sheet paper feeding issues.
Troubleshooting tractor paper feeding issues.
Procedures for cleaning the printer components.
Schedule and tools for periodic printer cleaning.
Instructions for cleaning the carriage shaft.
General technical specifications of the printer.
Information on the printer's printable area.
Printable area specifications for cut-sheet paper.
Printable area specifications for tractor paper.
Technical details of printer interfaces.
Specifications for the parallel interface.
Specifications for the USB interface.
Specifications for the serial interface.
General| Type | Dot Matrix Printer |
|---|---|
| Interface | USB, Parallel |
| Weight | 1.1 kg |
| Noise Level | 55dB |
| Print Width | 72mm |
| Paper Type | Continuous paper |
| Dimensions | 186 x 145 x 133 mm |
| Printing Method | Impact dot matrix |
| Paper Handling | Friction feed |
| Print Speed | 250mm/s |
To Next Page
