DP321 User's Manual
- 36 -
Appendix A Specifications
A.1 General
Item Description
Type 9 Pin Dot Matrix Impact Printer
Print direction Uni-directional or bidirectional logic seeking
Number of columns 80 columns (10 CPI)/ 203.2 mm
Normal peed
(NLQ)
High speed
(DRAFT)
Super high speed
(SUPER-DRAFT)
10 CPI 56 CPS
225 CPS
300 CPS
ASCII
12 CPI 67 CPS
270 CPS
337 CPS
Normal speed High speed
6.7 CPI 37 CPS 75 CPS
Print speed
Chinese
7.5 CPI 42 CPS 84 CPS
Diameter of wire: 0.3 mm
Print head
Life: 400 million dots/wire
Resolution 240 x 144 dpi (Max.)
ASCII: 17 international character sets (U.S.A, FRANCE, GERMANY, U.K., DENMARK1,
SWEDEN, ITALY, SPAIN 1, JAPAN, NORWAY, DENMARK2, SPAIN 2, LATIN AM, KOREA,
LEGAL, HOLAND, TURKEY)
Character set
Chinese: GB 18030
Code
20 variety: U.S.A, MULTI, PORTUGAL, CANADA, NORWAY, ICELAND, BRASCII, ABICOMP,
ROMAN 8, IS0 LTN1, PC858, ISO LTN9, ARAB NLS, WIN 1256, TURKEY, WIN LAT1,
CYRILLIC, RUSSIAN, THAI, VIETNAM
ASCII: DRAFT, ROMAN, SANS SER
Fonts
Chinese: GB 18030 song ti
Bar code
EAN-13, EAN-8, Interleaved 2 of 5, Matrix 2 of 5, Industrial 2 of 5, Code 39, Code 128 B, Code
128 C, NW-7
ASCII: 10 CPI, 12 CPI, 15 CPI, proportional
Character pitch
Chinese: 6.7 CPI, 7.5 CPI
Line space 1/6 inch, programmable in 1/432 inch increments
Normal mode: 3 inches per second (Continuous feed)
63ms formfeed one line (1/6 inch)
Paper feed Speed
Copy mode: 3 inches per second (Continuous feed)
63ms formfeed one line (1/6 inch)
Emulation EPSON ESC/P-K2, IBM 2391
Interface
Parallel interface: Centronics (IEEE1284 NIBBLE Mode)
USB interface: USB 2.0 Full-Speed
Serial interface: RS-232C
Note: According to specific interface standards
Input Buffer 132 KB
Model: JMR108 (or EPSON LX-300+II—#8750)
Ribbon
Life: 3 million characters (draft mode)
Noise
＜53 dB (A) (ISO7779 standard)
Control panel The control panel consists of four keys and four LED indicators.
Cut sheet Feed paper by friction
Paper feed type
Tractor paper
Feed paper by drive tractor
To Next Page
Loading...
