DP321 User's Manual
- 37 -
Feed paper by draught tractor
Width: 148 ～ 257 mm
Thickness: 0.065 ～ 0.14 mm
Cut sheet (Feed by tractor)
Weight: 52 ～ 90 g/m
2
Width: 101.6 ～ 254 mm
Total Thickness: 0.065 ～ 0.39 mm
Weight (Single paper) : 52 ～ 82 g/m
2
Tractor paper (Feed from rear to front)
Multiple paper (Every page): 40 ～ 58 g/m
2
Width (Mount) : 101.6 ～ 254 mm
Least label: 63.5 × 23.8 mm
Thickness (Mount) : 0.07 ～ 0.09 mm
Total thickness: 0.16 ～ 0.19 mm
Paper specification
Not dry gum label (Feed from rear to front)
Weight: 68 g/m
2
Max paper thickness 0.39 mm
Copy Original + 3 copes
Physical dimensions 366 (Width) × 275 (Depth) × 156 (Height) mm
Weight Approx. 4.3 Kg
Temperature: 5 ～ 35 ℃
Operating environment
Humidity: 40%RH ～ 80 %RH
Temperature: -40 ～ 55℃
Environmental
conditions
Storage environment
Humidity: ≤93 (40℃)
Rated voltage: 110V/220VAC
Note: Please refer to the nameplate label on the printer for detailed voltage specification.
Power requirements
Rated frequency range: 50Hz
Power consumption
① Operation: 47 W; ② Max: 130 W; ③ Standby: 2.8 W.
Note: Only when the produce doesn’t connect power supply, could consume zero energy.
Reliability
MTBF≥10,000 hours (IEC 605.7standard)
Safety marks EN60950
EMI B class
A.2 Printable Area
Note: 1. To assure the print quality, please make sure the print contents are within the printable
area.
2. If the print contents exceed the printable area, the print head may be damaged.
A.2.1 Cut Sheets
To Next Page
Loading...
