DP350 User's Manual
- 20 -
2.4 Other Function Descriptions of Control Panel
2.4.1 In the Tractor Paper Mode
TEAR
1. In the offline mode, if the paper is at the print position, press TEAR key once and the printer feeds
paper to the tear position.
2. In the offline mode, if the paper is at the tear position, press TEAR key once and the printer ejects
paper to the next page or the printing home position of the current page.
LF/FF
In the offline mode, if the paper is at the print position, press the LF/FF key once (less than 0.5 second),
the printer would feed the paper one line base on current line spacing setting. Alternatively, hold the
LF/FF key down, the printer would load one page of tractor paper.
LOAD/EJECT
1. When the paper is at the ready position, press LOAD/EJECT key once, the paper would be fed into the
printing home position automatically.
2. When the paper is at the printing home position, press LOAD/EJECT key in the offline mode, the
paper would return to the ready position.
3. When the paper is at the general print position (not the printing home position), press LOAD/EJECT
key once in the offline mode less than 0.5 seconds, the paper is ejected one line. Alternatively, hold the
LOAD/EJECT key down, the printer would eject one page of tractor paper if the ejectable page length
is more than one page. If the paper ejectable length is less than one page, the paper would feed back
to the ready position.
4. When the paper is at the tear position, press LOAD/EJECT key once, the printer would eject one page
of tractor paper.
ONLINE
1. If the printer has loaded paper in the offline mode, press this key to enter ONLINE mode, the ONLINE
LED is on and the printer enters into the print mode.
Press this key in the online mode, the printer is offline, ONLINE LED blinks and the printer can not
print.
2. If the paper is at the tear position in the offline mode, press ONLINE key, the printer would go back to
the printing home position of current page or that of the next page.
2.4.2 In the Cut Sheet Mode
LF/FF
If the paper is at the print position in the offline mode, press the LF/FF key once (less than 0.5 second),
the printer would feed the paper one line base on current line spacing setting. Alternatively, hold the
LF/FF key down, the printer would eject the paper until the cut sheet is entirely ejected.
LOAD/EJECT
If the paper is at the print position in the offline mode, press the LOAD/EJECT key, the paper would be
entirely ejected from the printer.
ONLINE
If the printer has loaded paper in the offline mode, press the key to enter ONLINE mode, the ONLINE
LED is on and the printer enters into the print mode.
Press this key in the online mode, the printer is offline, ONLINE LED blinks and the printer can not print.
2.4.3 Print Speed
The setting method of the print speed:
To Next Page
Loading...
