Jolimark DP350 - Appendix A Specifications; A.1 General Specification

DP350 User's Manual
- 43 -
Appendix A Specifications
A.1 General Specification
Item Description
Printing method 24-pin Dot Matrix Impact Printer
Printing
direction
Bidirectional logic seeking
Printing width 80 columns (10cpi) / 203.2 mm
ASCII
Speed 10 CPI 12 CPI
Letter 102 CPS 122 CPS
Normal speed 150 CPS 180 CPS
High speed 300 CPS 360 CPS
Printing speed
Super high speed 400 CPS 480 CPS
Wires: 24 Pins
Print head
Diameter of wire: 0.22 mm
Resolution 360 x 360 dpi (Max.)
Character set
ASCII: 17 international character sets (U.S.A, France, Germany, U.K., Denmark I,
Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain II, Latin America,
Korea, LEGAL, Holland, Turkey)
Code page
U.S.A, MULTI, PORTUGAL, CANADA, NORWAY, EAST EURO, CYRILLIC,
RUSSIAN, HUNGARY, KAMENICKY, TURKEY, ICELAND, BULGARIA, MAZOVIA,
GRK 437, GRK 851, GRK8859-7, GRK 1253, ARAB NLS, ARAB EXT, WIN LAT1,
WIN LAT2, ISL LTN1, ISO LTN2, TUR8859-9, ISO LTN9, KBL, LATIN 7
Font
ASCII: Draft, Roman, Sans Serif, Courier, Prestige, Script, OCR-B, OCR-A , Orator
Note: In high speed mode or super high mode, printer would automatically
change the ASCII font to Draft when printing ASCII characters.
Bar code
EAN-13, EAN-8, Interleaved 2 of 5, matrix 2 of 5, industry 2 of 5, code 39, code 128 B,
code 128 C, NW-7
Character pitch ASCII: 10 CPI, 12 CPI, 15 CPI, proportional
Line spacing 1/6 inch, 1/8 inch, programmable in 1/360 inch increments
Maximum paper
feed speed
152.4 mm/s
Emulation EPSON ESC/PK2, IBM 2391
Interface
This printer can be configured with the following interfaces:
Parallel Interface: Centronics (IEEE1284 NIBBLE)
USB Interface 1: 2.0 Full-Speed
USB Interface 2: 2.0 Full-Speed
Serial Interface: RS-232C
Ethernet Interface: 10/100Base-T
Note: Please take the specific interface as standard.
Buffer memory 132 KB
Model: JMR120
Ribbon
Life: 10 million characters (draft mode)
Noise
＜53 dB (A) (ISO7779 standard)
Control panel 5 keys, 3 LEDs