To Next PageTo Next Page
Need help?Do you have a question about the Jonsered 2035 and is the answer not in the manual?
Preparation steps before operating the chainsaw, including reading the manual and restricting use to adults.
Guidelines for safe operation, emphasizing two-handed use, proper ventilation, and avoiding hazardous situations.
Instructions for keeping the chainsaw in optimal condition, including professional servicing and checking chain movement.
Essential safety advice for handling fuel, including avoiding sparks, open flames, and proper mixing and storage.
Techniques to prevent the chain from being pinched or stopped, avoiding sudden reverse motion.
Methods to prevent the saw from being pulled away from the operator during a cut.
Ensuring the work area is free from obstructions to prevent accidental contact with the chain.
Strategies to minimize kickback risk, including chain sharpness, tension, and proper cutting techniques.
Tips for maintaining secure grip and balance while operating the saw to ensure control.
Explanation of the chain brake's function in stopping the chain during kickback and its limitations.
Information regarding potential health effects of prolonged vibration exposure and seeking medical attention.
Step-by-step instructions for attaching the bumper spike to the chainsaw.
Guide for fitting the guide bar and chain onto the chainsaw, including checking direction and tension.
Detailed instructions on how to check and adjust the chain tension for optimal performance and safety.
Instructions on correctly mixing fuel and oil and safely filling the fuel tank.
Explanation of the automatic oiler system and the importance of keeping the oil tank filled.
Procedure for checking the chain brake's immediate stopping capability at full throttle.
How to test the inertia-activated chain brake by dropping the saw onto a stump.
Key operational tips, including cutting only wood, avoiding foreign objects, and keeping the chain clear of dirt.
Specific methods for felling trees, emphasizing planning, clear areas, and retreat paths.
Detailed steps for making the notch cut and the felling cut to control the direction of fall.
Overview of different cutting methods for bucking, including overcutting and undercutting.
Instructions for cutting felled logs that are not supported, focusing on relieving stress.
Techniques for bucking logs when they are placed on a support stand or another log.
Methods for safely removing branches from a felled tree, avoiding hazards like springpoles.
A guide to diagnosing and resolving common engine and operational problems.
Instructions for cleaning the air filter to maintain engine performance and reduce emissions.
Guidance on servicing the guide bar, including cleaning oil holes and checking for wear.
Information on the importance of carburetor adjustment and recommendation to contact a service dealer.
Detailed technical data for the chainsaw's engine, including volume, stroke, and speed.
Information on the ignition system manufacturer, type, and spark plug specifications.
Specifications for the fuel tank capacity, oil pump, and oil type used in the chainsaw.
The weight of the chainsaw without the bar and chain.
Details on bar length, chain pitch, tip radius, and chain speed.
Data regarding the equivalent noise pressure level at the operator's ear and power level.
Measurements of vibration levels for the front and rear handles.
General