Joovv Mini - Attach Supports and Hang Hooks

Screw the threaded posts into the top of all four
Joovv devices with the included Allen wrench. Then,
screw the cable supports to the threaded posts of
Joovv devices #1 and #2, as shown in Figure D.
Next, remove two snap links from the height-
adjusting devices and connect them to the cable
supports.
STEP 5
FIG. D
Hang the door hooks about 9” apart on any
standard size door as shown in Figure E.
STEP 6
9 INCHES
FIG. E
Door Mount
(2 people required)
SETTING UP YOUR JOOVV QUAD
6.5