JOSAM homebase 4 - System Start-Up

i-track II
System start-up
73
System start-up
To start up the system before measurement click on [Settings] in the start window.
Click on [Communication] in the settings window.
Switch on both the measuring heads and the optional centre line tool laser.
A green LED will light up to indicate the systems are activated.
NOTE
During installation and if experiencing communication problems:
To prevent Bluetooth conicts during installation and communication problems, the
internal Bluetooth should be disabled before the JOSAM Bluetooth dongle (JT621)
is inserted. For Bluetooth connection instructions, see the Homebase Installation
Guide and Registration Manual.