jotron TR-810 - Frequency Setting

5.1.1 Note on frequency setting
The frequency is set according to the procedure described in ICAO annex 10. This is a way of
setting the frequency in a mixed 8.33* and 25 kHz environment. The frequency set does not
always reflect the actual transmit or receive frequency but is the frequency used to orally
communicate the frequency between controllers and pilots.
The frequency and bandwidth used are in accordance with the table below:
Display
Actual
frequency
[MHz]
Bandwidth
[kHz]
118.000
118.000
25
118.005
118.0000
8.33*
118.010
118.0083
8.33*
118.015
118.0167
8.33*
118.025
118.025
25
118.030
118.0250
8.33*
118.035
118.0333
8.33*
118.040
118.04167
8.33*
118.050
118.050
25
118.055
118.0500
8.33*
118.060
118.0583
8.33*
118.065
118.0667
8.33*
118.075
118.075
25
118.080
118.0750
8.33*
118.085
118.0833
8.33*
118.090
118.09167
8.33*
118.100
118.100
25
……….
………
……..
136.975
136.975
25
136.980
136.9750
8.33*
136.985
136.9833
8.33*
136.990
136.99167
8.33*
*) 8.33KHz are only applicable outside USA and Canada
Table 5.1.1-1, Frequency setting 8.33 and 25 kHz channels
84417_O&I_TR-810_E  Operating Instructions
Page 5-2