27
Cleaning & Maintenance
Maintain the main body
For daily maintenance, gently wipe the main body with dry cloth. Do not rinse
the main body with water.
Clean the dirty water tank
Remove the dirty water tank, open the top cover,
and rinse the interior of the dirty water tank with
clean water.
Clean the float,filter element and
filter net
Remove the filter screen from the top cover of the
dirty water tank, and rinse the float and filter
element and filter net with clean water. After
cleaning, place them on the air vent to dry them.
(as shown in the right figure)
Tip:
1. Users are recommended to replace the filter net
every six months.
2. It takes longer time to dry the filter net. Use
two filter nets alternately.
3. Do not touch the filter net surface with hands,
brushes or sharp objects, to avoid damage to the
filter net.
Maintain the foot
Before maintenance, turn off the power supply, and remove the battery, clean
water tank and dirty water tank.
Wipe the roller, scraper and infrared induction lamp with wet cloth. (as shown
in the right figure)
Before maintenance, remove the power plug from the socket, turn off the power supply, and remove the battery from
the product.
filter net
C
M
Y
CM
MY
CY
CMY
K
To Next Page
Loading...