To Next PageTo Next Page
Need help?Do you have a question about the JOYTECH DKC500DC and is the answer not in the manual?
General| Brand | JOYTECH |
|---|---|
| Model | DKC500DC |
| Category | Gate Opener |
| Language | English |
Essential safety guidelines for operating and maintaining the gate opener.
Details on the gate operator's voltage, motor, speed, weight limits, and environmental parameters.
Ensuring the gate is level, slides smoothly, and pre-setting electrical conduits.
Mounting the gate operator base securely to a concrete pad with attention to leveling and alignment.
Installing magnetic limit blocks and the rail onto the gate for precise stopping and gear engagement.
Attaching the infrared sensor receiver and emitter, ensuring proper alignment and connection.
Connecting the main power supply (AC110V/AC220V) and ensuring proper grounding.
Connecting infrared sensors, caution lights, and button switches to the control board terminals.
Procedure to reverse motor operating direction by swapping wires if the gate moves incorrectly.
Adjusting motor working time and output force for safe and optimal gate operation.
Configuring auto-close delay times and limit switch modes using DIP switches.
Adding new remote controls or erasing all previously programmed remotes.
Wiring the simple charge controller to the DKC500DC control board and battery.
Connecting solar panels and battery to the solar charge controller and control board.
