JPT YDFLP-E-20-M7-S-R User Manual

YDFLP-E-20/30-M7 User Manual
File Number: J-SI-0036
17
4.1 GUI Introduction
4.1.1 Serial COM Port
4.1.1.1 Connecting method
Using USB TO RS232 cable to connect PC’s USB to the Laser’s RS-232 connector.
Click and open the Serial Com Number as follow:
Figure 12 The Selection of GUI Serial Port Connection
After connecting the data line, check the serial port number: my computer →
properties → hardware → device manager →

JPT YDFLP-E-20-M7-S-R Specifications

General

Brand	JPT
Model	YDFLP-E-20-M7-S-R
Category	Measuring Instruments
Language	English