General Section 22
Stick Mode
The Mode of the sticks can be chosen with this
function. You can choose from Mode 1, 2, 3 or 4. The
transmitter comes set to Mode 1 which is the most
common mode in Australia. If Mode 2 or Mode 4 are
chosen you will need to remove the back of the
transmitter cover and swap the throttle ratchet and
elevator spring.
1. From SYSTEM M. highlight and select STICK MOD
using the Selector.
2. Highlight and select the current mode. A list of
available modes 1 – 4 will appear. Highlight and
select the desired mode.
3 – Elevator 1 – Throttle/Spoiler
Mode 1
4 – Rudder
2 – Aileron
1 – Throttle/Spoiler 3 – Elevator
Mode 2
4 – Rudder
2 – Aileron
3 – Elevator 1 – Throttle/Spoiler
Mode 3
2 – Aileron
4 – Rudder
1 – Throttle/Spoiler 3 – Elevator
Mode 4
2 – Aileron
4 – Rudder
To Next Page
Loading...
