JRC JCY-1900 - Checking the Alert - [Alert] Button

2. MAINTENANCE
JCY-1900
/
1950
V
DR Service Manual
45
DOC No. 7ZPNA4409
3
Remove the Fan unit (Fan + Bracket）.
1) Loosen two screws.
2) Sliding the unit below, remove the unit.
4
Remove the Fan from the Bracket.
1) Remove four screws.
2) Exchange for new Fan.
* Turn the label to the front, and the cable to
right-hand side.
2) The mounting method
Carry out mounting in the reverse order to removal.
* Set the expiration date with maintenance software. (Refer to 2.9.2.)
* When attaching the Fan to the Bracket, turn the label to the front, and the cable to right-hand side.
* When attaching the Fan unit to the FGU, turn the label on the Fan to the outside.