Photograph 5
Silicon rubber was spread from 2 to 3mm on the hull bottom of a ship and the transducer side,
and this silicon rubber fixed surroundings.
Confirmation
Check it after about 24 hours after the above working end.
Silicone rubber is necessary to fix for 24 hours.
Material to prepare
ITEM TYPE JRC CODE
Transducer for JFE-582 UT-200ND20 (200kHz) 6UNBS00285
JFE-585 UT-50MD-20 (50kHz) 5UNAB00025
--------------------------------------------------------------------------------------------------------
Silicone rubber ex.KE-45-W SHINETSU 1162010009 @100g 3pcs
Rubber tape BRXP00469 one roll
Plastic tape one roll
Or equivalent
To Next Page
Loading...
