Need help?Do you have a question about the JRC JFV-700 Series and is the answer not in the manual?
General| Category | Marine Equipment |
|---|---|
| Display Type | LCD |
| Power Supply | 13.8V DC |
| Operating Temperature | -15°C to +55°C |
| Power Output | 25 W / 1 W |
| Output Power | 25W / 1W |
Explains the warning symbols and cautionary marks used in the manual and on the equipment.
Identifies the model numbering system and its components for customization.
Lists standard and optional components, including model numbers and remarks.
Details the recommended mounting location and procedure for the echo sounder unit.
Illustrates the wiring diagram for connecting various components of the echo sounder system.
Provides detailed procedures for connecting power cables and transducer cables.
Details the method and parts required for mounting the transducer to the hull.
Lists single frequency transducers, their specifications, and compatibility with JFV-700/HP models.
Explains the importance and procedure for proper grounding to ensure safety and system function.
Details how to connect optional accessories like remote controllers and sensors to the unit.
Guides on connecting external equipment using JRC or NMEA0183 formats.
Guides on adjusting the transducer frequency for optimal performance and image quality.
Describes standard settings for various fishing methods to optimize performance.
Provides setup recommendations when replacing a competitor's product with this system.
Details the component adjustments required to configure the unit for single frequency operation.
Details the component adjustments required to configure the unit for dual frequency operation.
Provides instructions on performing a master reset for system initialization and configuration.
Lists mechanical parts and provides assembly drawings for the JFV-700/HP unit.
Details the default system settings for the JFV-700/700HP unit as delivered.
Illustrates the hierarchical structure of the unit's menus and settings.
Provides a block diagram or schematic for the CWB-1038 CHASSIS.
To Next Page
