3
Usage Hints
When installing this set, be sure to connect
the grounding wire to the grounding terminal
of the set. Otherwise, an electric shock can
result when a failure or leakage occurred on
the set.
Do not damage, break or modify the power
cord.
Placing a heavy load, heating, pulling or for-
cibly bending the cord can damage it result-
ing in a fire or an electric shock.
Do not use this set at a voltage other than the
supply voltage stated on the set. Otherwise,
a fire, an electric shock or system failure can
result.
Do not touch inside the set with wet hands.
When your hands are wet, don’t try to con-
nect or disconnect the power cord or touch
the switches. Otherwise, an electric shock
can result.
To Next Page
Loading...
Need help?
General
