JRC JMA-3910-6 - Displaying ／ Clearing Plot no

3 – 46
3.3
3
3.3.23.8 Displaying ／ Clearing Plot No.
This function is used to select whether the plot No. is displayed or not.
The plot No. is not displayed at the default setting.
The number is not displayed when "OFF" is selected.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
3
key to open the REDAR #3 menu.
3. Press the
3
key to open the EPA menu.
4. Press the
2
key to select "PLOT NUMBER".
5. Press the
2
key to select "OFF" or "ON".
6. Press the
ENT
key to confirm the setting.
Exit
7. Press the
SUB
MENU
key.
EPA
EPA
Press an item number key.
0. PREVIOUS MENU
1. VECTOR TIME 0 MIN (0-60 MIN)
2. PLOT NUMBER OFF ON
3. LIMITS CPA 1.0 NM (0.1-9.9 NM)
TCPA 15 MIN (1-99 MIN)
4. AUDIBLE WARNING OFF
ON
5. DISPLAY OF CPA RING OFF
ON
6.
7.
8.
9.
To close this menu, Press (SUB MENU) key.
Attention