5.2 TT OPERATION
ņ30
5
yy
yyy
5.2.7 TT Test Menu
CAUTION
Target Tracking Function Test is provided to test if
the target tracking function is operating normally.
Thus, do not use the function except when you
test the target tracking function.
In particular, if this mode is used during
navigation, pseudo targets appear on the radar
display, which may be confused with the actual
targets. Do not use this mode during navigation.
Otherwise, this may cause accidents.
The following simulation to be used for TT can be referred to and modified:
[I] Test Video: Test video for use in checking the operation of the target detection circuit.
[II] TT Simulator: Pseudo targets are generated on the radar display to check whether the TT
functions are operating normally.
[III] Status: Displays the TT status.
[IV] Gate Display: Gate size to acquire and track targets.
To Next Page
Loading...
