4-39
[III] Baud rate setting (Baud Rate (BPS))
This setting is enabled when beacon frequency mode is set to manual.
Procedures 1. Press [RADA MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [2] key.
The GPS Setting screen will appear.
5. Press [3] key.
From the pull-down menu, the following
communication speeds can be selected:
50bps/100bps/200bps
Set the desirable communication speed.
6. After the entry has been completed, press [5] key to send the settings to
the DGPS receiver.
To Next Page
Loading...
