ġ
4-40
4
[IV] DGPS Mode setting (DGPS Mode)
When DGPS mode set to on, DGPS use the information from beacon to get reliable position.
When DGPS mode set to off, the accuracy of position is same as GPS.
Procedures 1. Press [RADA MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [2] key.
The GPS Setting screen will appear.
5. Press [4] key.
Pressing [4] key will toggle between On and Off.
6. After the entry has been completed, press [5] key to send the settings to
the DGPS receiver.
To Next Page
Loading...
