SECTION 3
INSTALLATION OF THE DISPLAY UNIT
3.1 SELECTING THE INSTALLATION POSITION ........................................ 3-1
3.2 INSTALLATION OF THE LCD MONITOR................................................ 3-2
3.3 INSTALLATION OF THE OPERATION UNIT...........................................3-4
3.4 INSTALLATION OF THE POWER CABLE (CFQ-5436) ..........................3-5
3.5 INSTALLATION OF THE CABLE (CFQ-6912)
BETWEEN THE RADAR PROCESS UNIT AND THE SCANNER .......... 3-8
3.6 CONNECTING TO THE GPS RECEIVER..............................................3-10
3.7 CONNECTING TO THE GPS COMPASS .............................................. 3-15
3.8 CONNECTING TO NMEA HEADING OUTPUT DEVICE....................... 3-23
3.9 CONNECTING TO THE GYRO AND ELECTROMAGNETIC LOG
(NSK UNIT SETTING) (OPTION) ........................................................... 3-25
3.10 CONNECTING TO THE PC PLOTTER ................................................3-31
3.11 CONNECTING TO OTHER NMEA DEVICES ......................................3-32
3.12 CONNECTION WITH OTHER DEVICES
(SUB INDICATOR OUTPUT AND SLAVE INPUT)...............................3-34
3.13 POWER SUPPLY (NBA-5111) (OPTION) ............................................ 3-38
3.14 TARGET TRACKING (NCA-877A) (OPTION) .....................................3-39
3.15 PLOTTER CIRCUIT (NDB-44) (OPTION) ............................................3-41
3.16 CONNECTING TO AIS (NQA-2155) (OPTION) ...................................3-43
3.17 COASTLINE ROM CARD/MEMORY CARD ........................................3-47
3.18 CONNECT SLAVE MONITOR / VDR ...................................................3-50
3.19 SIMPLIFIED INTER-SWITCH INSTALLATION .................................... 3-52
3.20 SUB KEY-BOARD INSTALLATION .....................................................3-54
3.21 CONNECTING TO EXTERNAL BUZZERS..........................................3-56
3.22 CONNECTING CONTACT SIGNALS TO EXTERNAL DEVICES........3-58
To Next Page
Loading...
