3─116
3
3.10 APPLIED OPERATIONS
y
y y
[3] Sounding Unit
• Sets the units when soundings values are displayed with C-MAP.
• Press [3] key to display a list of units.
• 1: FEET
2: FATHOM
3: METERS
4: DECIMAL FATHOM
You can select one from the above four items. Select the item you want to set, pressing the numeric keys
[1] to [4].
[4] Light Sectors Display
• Sets whether or not the light sectors are displayed.
• Each time you press [4] key, the light sectors display item is switched between ON and OFF.
• ON: Displayed
OFF: Not displayed
[5] Light Sectors Level
• Sets levels when light sectors are displayed with C-MAP.
• Press [5] key to display a list of levels.
• Selects one from level settings A to H.
[6] Chart Boundaries
• Sets whether or not the Chart Boundaries are displayed.
• Each time you press [6] key, the function is switched between ON and OFF.
• ON: Displayed
OFF: Not displayed
[7] Buoy and Beacon
• Sets display style of the buoy and beacon.
• Press [7] key to display a list of display style.
1: OFF
2: INTER NATIONAL : The style based on the official paper chart presentation.
3:United States : The style based on the NOAA paper chart.
4: SIMPLIFIED : Simplified style display.
[8] Geographical Names
• Sets whether or not the geographical names are displayed.
• Each time you press [8] key, the geographical name is switched between ON and OFF.
• ON: Displayed
OFF: Not displayed
[9] NEXT
• Going to Next page.
• Another C-MAP setting menu is displayed..
To Next Page
Loading...
