5─37
rack Display
1. All
2. ATA Track No.1
3. ATA Track No.2
4. ATA Track No.3
ON
5. ATA Track No.4
ON
6. ATA Track No.5
7. ATA Track No.6
ON
0. EXIT
ON
8. ATA Track No.7
ON
9. NEXT
ON
ON
INDIVIDUAL
1.
INDIVIDUAL
2. ON
3. OFF
[III] Setting Display of Target Tracks (Track Display)
The display of target tracks can be set to ON/OFF. For the display of tracks, setting for display/nondisplay of
all ships or for individual ships can be made.
Procedures 1 Press [3] key while the ATA Track
Setting Menu is open.
Track display can be set.
2 Press [1] key.
Which is to be selected, setting individual
tracks or display/nondisplay for all ships, is to
be determined depending on the setting for the
ALL item.
Setting individual tracks: Select INDIVIDUAL
Setting display for all ships: Select ON
Setting nondisplay for all ships: Select OFF
For setting individual tracks
Selecting INDIVIDUAL makes it effective to set track numbers
from ATA Track No.1 to ATA Track No.10 as well as individual
settings for Other. Select display/nondisplay for each target.
Each time ON/OFF window is pressed, a decision branch is
switched to another.
ATA Tr a ck N o .1 to
ATA Track No.10: 1st ship to 10th ship
Other: 11th ship to 20th ship
Settings are made as shown above.
* Note that individual settings are effective only when INDIVIDUAL has been set.
To Next Page
Loading...
Need help?
General
