JRC JMA-5220-7 - Page 313

8─12
8
8.1 Performance Check
yyyy
yyyy
T
est Menu
1. Self Test
2. Monitor Test
3. Keyboard Test
4. PM Display
ON
5. Error Logging
6. System INFO
0. EXIT
MAGI
PM
[IV] PM Display
Displays the bar indicating the performance monitor status.
* Execution of this item needs a PM unit.
Procedures 1 Press [4] key while the Test Menu is
open, and set PM Display to ON.
The PM bar will appear under the MAGI bar.
The setting of PM Display is switched back and
forth between ON and OFF each time [4] is
pressed.
Exit 1 Press [RADAR MENU] key.
The menu will be closed.